Pictures of a T80 side panel.

Hi All,

I am wondering if anyone can help me out. I am after a good quality, close up image of the "Townmate 4 STROKE SHAFT" sticker that is usually on the side panels.

It is highly likely that the stickers are no longer available from Yamaha, so it looks like I will need to reproduce a couple for my T80 as it doesn't have them.

Any help would be greatly appreciated.

PS: I have looked on the web without any luck.

Cheers, Frank.

Hi Frank

Here's a pic. of my sidepanel which may be of use. It's starting to get tired and never was stuck on properly. Higher res. available if you let me know your email addy.



Doug.

Reply nice one Doug I had some new ones made up for mine but right now my little T80 is over in mid Wales at my mothers I am planning on picking it up next week.

These folk are Handy when needing decals

http://www.sunrisegraphics.co.uk/sunrise/

Hi Doug,

Thanks heaps. my email address is: franktheodore@ymail.com

I have seen the SHAFT DRIVE decal on the shaft drive housing but I have been told it was on the Asian models only. I have checked with the help of a spare parts person at Yamaha Australia who has access to the Japanese Spare Parts Database and that is what he told me. It is not available.

Also, would you happen to have the following decals on your T80?

Gear selection decal on the handlebars, and the two small labels on the right side of the rear mud guard behind the rear shock absorber.

Cheers, Frank.

Hi Frank
I have several arts this decal (TOWNMATE)
I can send it to Sydney

Hi Misiopajur,

Do you mean you have the TOWNMATE decals? Do you have left and right?

If so, how can I pay you for postage to Sydney?

Please let me know.

Cheers, Frank.

Yes I've left & right decals

I'll help You and maybe You will help me - in future

Please give me your post adres

Hi Misiopajur,

Mate, you are a champion. Let me pay for them at least or the postage at least.

Otherwise, my address is:

Frank Theodore
Unit 6/7,
40 McEvoy Street,
Waterloo, 2017,
NSW,
Australia.

I totally agree, if I can help you, let me know.

Very much appreciate it. Cheers, Frank

Frank
I was posted decal to Australia today

REMEMBER!
- first coat(clear) is transport coat

Hi Adam,

Thanks very much for doing that.

Cheers, Frank.

Guys,

Does anyone know where I can get Decals for the casing - I have the originals but I will be spraying the casing and I doubt i'll be able to put them back on.

Pat

Hello

I know this is an ongoing saga - looking for the ellusive stickers for the Blue Townmate's as shown earlier in this post

Anyone can help me as i'm after 2 sets, 1 for the good one and 1 for the Dog that WILL BE RESTORED for the other half who has suddenly falled in love with my second T80.

Many thanks

Moose

Hi, I have taken off the old sticker before I got the side pannels resprayed. The stickers were in pretty good condition - I'm going to take it to a printer and see can I get the recreated. I'll let you know how I get on - If it's a good job I'll get a few sets

Here in the UK I've used http://www.sunnystickers.co.uk/ to produce decals. I spent some time producing a photoshop image which I uploaded to their site. The decals were on the doormat two days later. Do spend a little time getting your image just right, colour and size, at good resolution ( 300dpi ). I was pleased with the results.
Doug.

I tried these guys a few months back but they were unable to help me out so the only option was to reproduce the artwork myself. Having now done that I will be getting a batch printed along with the other decals on the bike as per the originals, UV sensitive inks on clear vinyl. Not too sure how much they will end up costing, but I doubt they will be expensive. I have searched high and low to see if they are available but unfortunately they are not, not even in Japan.

For those that are interested, let me know if you would be willing to purchase a set. It would be good to get an idea of numbers.

Regards, Frank.

Hi All,

Apart from another member who has already contacted me, to those of you who are interested in a set of decals for your T80 please let me know.

I will be reproducing:
• Side panels - Left and Right
• "4 SPEED" decal on the handlebars,
• "SHAFT DRIVE" decal on the shaft drive housing,
• VIN decal, but I believe there is no point as it is dedicated to the VIN number of each bike, from which I believe you guys in the UK can already get otherwise if you still want one of these, I will need your VIN to have it printed as such.

I can get them reproduced at a reasonable cost but numbers would be good.

Let me know,

Cheers, Frank.

Hi Frank, only just spotted this thread:oops: Put me down on your list for decals, let me know how much, when do you expect to get them made.
Many Thanks,
Adrian.

Hi All,

I probably should have replied with an update a while back. Apologies but unfortunately to get these printed will be too expensive and the screen printer that does all the automotive decals for the classic cars here in Australia is not interested in doing them. Not worth it for him or he couldn't be bothered, not sure. I spoke to him on the phone twice an emailed him twice with the artwork ready to go and haven't heard anything since, this was earlier this year. To do these properly, they have to be screen printed or printed on a plotter that prints white and not many do. I was promised by a few places they could do them, but when I showed a sample of the original, they could not supply the same but only a layered vinyl kind which is not right. We work with a proofer supplier and they sometimes have some EPSON digital proofers that can print on clear vinyl and print UV sensitive inks. They have these for testing purposes. If I get any more info, I'll post a reply. Regards, Frank.