carb for a t80

do any other carbs fit a t80, that I can buy new

Haven't tried myself but you could retro fit a similar Mikuni carb that has a similar sized throat diameter and manifold side but you would have to change the way the throttle and choke cables are hooked up. I saw a while back similar carbs available new but the choke and throttle setup on them was different than the original carbs.

Have a look here as a reference:

http://www.ebay.com.au/itm/Mikuni-VM16-Round-Slide-19mm-Carburetor-Carburettor-Spigot-Honda-Quad-ATV-Bike-/281412391736?hash=item41857c5338:g:mh4AAOSwP~tW6RYK

I'll see if I can find any info.

3hundredspartans wrote:Haven't tried myself but you could retro fit a similar Mikuni carb that has a similar sized throat diameter and manifold side but you would have to change the way the throttle and choke cables are hooked up. I saw a while back similar carbs available new but the choke and throttle setup on them was different than the original carbs.

Have a look here as a reference:

http://www.ebay.com.au/itm/Mikuni-VM16-Round-Slide-19mm-Carburetor-Carburettor-Spigot-Honda-Quad-ATV-Bike-/281412391736?hash=item41857c5338:g:mh4AAOSwP~tW6RYK

I'll see if I can find any info.

Problem being on these is that the choke is lever operated, so you wont be able to access it through leg shields. Also the throttle cable outlet from top of carb may foul the frame tube.