Problem removing swing arm

Hi again guys, got a problem removing my swing arm that has rotted out big time, any one removed one that knows location of a pin or correct way too remove it please let me know cheers

They ither slide out sweet or there a sod to get out,I was lucky, I think hack saw blade down sides and struggle , some one will have other ideas soon .

jstrong wrote:Hi again guys, got a problem removing my swing arm that has rotted out big time, any one removed one that knows location of a pin or correct way too remove it please let me know cheers

To start with cut through the right hand side oif swinging arm (brake side) & then try to unscrew the bolt, if its only siezed in the bush on that side you may be able to twist the bush out with it on the spindle. If its the other (drive side) one or both that have siezed you have big trouble. Depending on the state of the main frame it may be a scrap the whole bike job. You could if the frame is good strip the bike down & apply heat to burn out the rubber bushes but you still have to get the steel outer part of the bushes out the frame. If successful you will need two new bushes & a spindle. Best of luck