Sidestand Spring

Need a part number or ideally a contact for someone who has one.

Thanks in advance.

Here is a drawing of the side stand spring, I made one like this from a standard 15mm dia x 2mm wire thickness standard spring. I dont think new ones are available, but you may be able to find one of same size on eBay.

Got one from www.yamahamotorcyclespares.co.uk
Part number 109-27216-000

Thanks

marcopol wrote:Got one from www.yamahamotorcyclespares.co.uk
Part number 109-27216-000

Thanks

This is the brake lever spring (No 7 on the diagram), http://www.yamahamotorcyclespares.co.uk/spares/epc2.asp?modelID=9063&PageiD=29&m=YAMAHA+T80+TOWNMATE+STAND%2E+FOOTREST&uID=0
They are about the same overall length but the stand spring is 2.5 mm dia wire whereas the brake lever one is thinner at 2mm, also the coiled part of the spring is 40mm as against 54 mm long, so it fouls the pivot bolt on stand. I made my replacement out of a stainless steel 2mm dia wire spring & there is enough tension, so that should not be a problem, if it works OK thats fine. Note the wear on the ends of my old spring
Here is a pic of the two springs